Deck + Hot Tub + Trellis Planner

Setup

Click the existing deck surface

Sets the elevation the new deck must match, and anchors the deck footprint

Click where the tub center should sit

Pick a point on the ground in the new deck area (fine-tune below)

Point density 100%

Point size 1.0×

Width (along X) 144"

Depth (along Z) 118"

Rotation 0°

Nudge X 0"

Nudge Z 0"

Reveal above deck 16"

Nudge X 0"

Nudge Z 0"

Pad margin beyond tub 12"

Show trellis (standing-seam metal roof)

Height above deck 90"

Roof slope 5%

Overhang 12"

Rafter spacing 24" o.c.

Slope runs along local +Z (deck "depth" axis), away from the house end. Use Rotation above to orient the deck/trellis to match the real house wall.

Complete both setup steps on the left to calculate excavation depth from the real scan data.

Scan point cloud

Hot tub shell

6x6 sleepers

2x6 platform (pad)

New deck footprint

Trellis posts/beams

Standing-seam roof

Excavation line

drag: orbit · scroll: zoom · shift+drag: pan

Spec sheet copied to clipboard